Things To Keep In Mind When Using Your Reciprocating Saw

Some of the features of the reciprocating saw are as listed below:

• Large blade

• Can use a power cable or can be operated wirelessly

• Two handles hence a user uses both hands to operate

The design of the reciprocating saw is made in a manner that it would be handling challenging work. This means that there are high chances that you will be replacing the blade from time to time. This is essential to make sure that you cut through things easily and effectively using reciprocating saw.

A powerful saw like the reciprocating saw will certainly call for extra care when using it. It has got very sharp edges that can harm you if you are not careful with the way you are handling this tool. Some of the safety measures that are advocated when using the tool are as follows:

- Always use strong gloves when using the reciprocating saw

- The boots you wear should be fully covered with steel on the toes area

- Defensive eyeglasses should always be worn

- Ensure that you disconnect the saw from the power supply before trying to replace the blade

- Always use both hands since the saw is extremely powerful

- Never cut through objects that are connected to electricity

As mentioned above the reciprocating saw will be going through blade changing from time to time due to the strenuous cutting that it carries out. Before changing the blade you should read the signs of the blade that it actually needs replacing. It is important to replace the blade at the right time to make our work easier. When the blade takes a long time to replace it would be blunt and you would waste a lot of time trying to cut through the hard objects. Keep in mind that there are different blades for different types of reciprocating saws. Thus if you are not certain of the type of blade to use you should seek the help of an expert. This can even be from the store where you had purchased your reciprocating saw.

When you have the right blade you can now start the process of replacing the blade. First things first, ensure that the saw is not connected to any form of power supply. This would mean that you will have to take out the battery that it uses. This is a crucial step as skipping this can lead to permanent injuries.

The blade that is currently in the saw should be removed when the reciprocating saw has got its nose far from you. The body should not be anywhere near the nose of the saw as this is unsafe. The next thing to do is to follow the necessary steps in unlocking the blade that is in the saw. This will release the blade and you will be ready to install the new blade. Fitting in the new blade is very important as the blade should rest perfectly in its position. Do not alter the way the blade rests in its position. Use the lock knobs to make sure that they blade is fitted tightly in place.

Now you are done with replacing the blade in you reciprocating saw. Remember make sure that you follow the safety precautions when using and replacing the blade of your saw.